Docking and Undocking 2-3
Connect the power cable as follows.
Note: Ensure that the voltage selection switch
(located on the back of the NEC Versa Dock) is set
correctly for your environment. In the United States,
most wall outlets require you to set the voltage
selection switch to 115 volts. In many European
countries, however, the voltage setting switch
should be set to 230.
1.
Position the NEC Versa Dock on a flat surface close to an AC outlet.
2.
Attach one end of the cable to the AC power port on the NEC Versa
Dock.
3.
Attach the other end to a properly grounded wall outlet.
Connecting the power cable
The NEC Versa Dock is now powered on.
