Setting Up the Software 3-5
Installing Drivers
The drivers for the NEC Versa Dock can be found on the NEC Versa
Dock Software Setup CD. Refer to the readme.txt file on the CD for
details on driver installation for the NEC Versa Dock.
The Software Setup CD dialog box consists of the following
components.
!
Selection Tabs — Located just below the title bar, each tab represents
a software category.
!
Description — Located in the bottom portion of the dialog box, the
text describes the selected or highlighted software category or driver.
!
Install — Clicking the Install button installs the selected software.
!
Exit — Clicking the Exit button closes the NEC Versa Dock Software
Setup CD dialog box.
Once the NEC Versa Dock Software Setup CD dialog box appears,
follow these steps to install the desired software.
1.
Insert the NEC Versa Dock Software Setup CD into the CD-ROM
reader.
Note: If you have a combination of two CD-
ROM devices installed in the NEC Versa and the
NEC Versa Dock, be sure you have the NEC Versa
Dock Software Setup CD in the CD-ROM drive that
was installed first and has the lowest assigned drive
letter (such as D:\ or E:\).
2.
From the Start menu, type
Run
.
3.
Click the Browse button to access the Setup.exe file on the CD.
