NEC VERSA DOCK - SERVICE Manual Download Page 76

Page: 76 / 104

4-30 Installing Options and Connecting Devices

Align and connect the 25-pin parallel cable connector to the parallel
port on the NEC Versa Dock. Secure the cable with the screws
provided.

Align and connect the other end of the cable to the parallel port on
the device. Lock the connector clips.

Connecting a parallel printer

Connect the power cable to the device and a properly grounded wall
outlet.

Turn on power to the system and the device.

Note: Check that the device is online before you

try to use it. See the instructions that came with the
device for more information.

USB Devices

The NEC Versa Dock lets you take advantage of the latest USB
technology available to Windows 95 users.

Plug USB devices into your Windows 95 system as follows.

Summary of Contents for VERSA DOCK - SERVICE









































































































Search results

Summary of Contents for VERSA DOCK - SERVICE

Reviews:

Related manuals for VERSA DOCK - SERVICE

Brands by name

Popular brands

NEC VERSA DOCK - SERVICE, Manual

Search results

Summary of Contents for VERSA DOCK - SERVICE

Reviews:

Related manuals for VERSA DOCK - SERVICE

Brands by name

Popular brands