NEC UX5000, Hardware Manual

Page: 58 / 334

1 - 46 Chapter 1
Chapter 1 - Installing the Chassis
1. Determine the installation location for the wall bracket providing the appropriate spacing as shown
below.
●
It is suggested that plywood first be installed on the wall where the chassis will be positioned. This
allows for secure anchoring of the screws which will be supporting the weight of the chassis.
2. Secure the two metal support U-brackets to the wall. Each bracket is attached to the wall using 3 screws
each. The brackets should be spaced at the distance shown below.
Figure 1-61: ATTACHING THE METAL BRACKETS
Wall
1”
15 7/8”
18”
5 15/16”
13 3/4”
5 15/16”
1 1/8”
Bottom edge of metal bracket “H”
Top edge of metal bracket “A”
1” 1”