NEC UX5000, Hardware Manual, Page: 307 / 334

Chapter 6 - Specifications and Parts List
Chapter 6 6 - 23
ADA - Recording Adapter
Purpose
Recording of Handset/Headset/Speakerphone Speech
Target Phone
IP-CTS and Enhanced IP Phones
Enhanced Digital Phones
Install Slot
Bottom Slot
Interface to Recorder
For Tape Recorder: Stereo Mini-Jack (3.5 mm diameter)
For ACD: Barrel Terminal (AMP)
Jacks
2 - Input and Output
Recording Playback
Stereo
Playback Path
When voice recording to a PC using a CTI application, it is
possible to playback through the telephone.
Feature
Voice Sent to Recorder
Hookswitch Information
Power Consumption
0.8W approximately
Power Feed / AC Adapter
Supplied by telephone - no separate AC adapter required
(unless over 900m line length from system chassis).
Terminal Impedance
600 ohm or 30 ohm
Confirmation Tone Output
Confirmation tone to far end possible if recording device has
confirmation tone generation
Control for Recording
Recording started/stopped by off-hook or VOR
(synchronized with voice level) of the recording machine.
When the terminal is idle, no recording is done.
RoHS Compliant
Yes
Retrofit
Can connect to UX5000 telephone on an Aspire system.