SL2100 GETTING STARTED GUIDE
62
Give each exchange line the access properties for the TAM number.
PRG 14-07-01
Values available:
0 – No access
1 – Outgoing only
2 – Incoming only
3 – Retrieve held call only
4 – Outgoing and retrieve held call
5 – Incoming and retrieve held call
6 – Incoming and outgoing
7 – Incoming, outgoing and retrieve held call
TAM
Number
Trunk 1
Trunk 2
Trunk 3
Trunk 4
1
7
7
7
7
2
0
0
0
0
3
0
0
0
0
4
0
0
0
0
5
0
0
0
0
Although there are 128 TAM numbers available, only five are listed as this is normally sufficient.
2.11 Caller ID
You will need to enable this setting if:
You have Caller ID service supplied on your outside lines.
You have Analog telephones that are Caller ID compatible.
The SL2100 can detect the Caller ID and display it on the LCD display of the SL2100 system phones.
It can also be available at a Analog phone that is Caller ID compatible.
You will need turn on the Caller ID detection for each trunk where it will be received. You will also need to turn on
Caller ID for each of the analog telephones that are Caller ID compatible.
2.11.1 Program 14-02-10, Program 15-03-09
Turn on Caller ID for each Analog trunk.
2.11.1.1 Default Setting
The default for Caller ID is 1 (on for each trunk).
No. Operation
Display Shows;
1
Log into Programming Mode.
If you have already logged into Programming Mode, skip this
operation.
2
Dial
14 02 10.
For each trunk, enter 1 to turn on Caller ID. You can
overwrite the current entry and press
Hold
key to confirm the entry
and step to the next option.
3
When you are done, press
Mute
key several times to return to
Programming Mode.
4
Dial
15 03 09
. For each telephone, enter 1 to turn on Caller ID. You
can overwrite the current entry and press
Hold
key to confirm the
entry and step to the next telephone.
5
When you are done, press
Mute
key several times to return to
Programming Mode.
6
Press
Speaker
key to save changes and exit if you are finished.
2.11.2
Configuration sheet: Caller ID
With defaults shown.
Turn on the Caller ID for each trunk.
_
________________________
______
Program Mode
_______
_
Base
_
Service
_
OP1
__
OP2
__
14-02-10 Trunk1
Caller ID
0
:No
←
- +
→
15-03-09 TEL101
Ext No Display
0
:Off
←
- +
→