SL2100 GETTING STARTED GUIDE
53
2.6 Telephone Ringing Assignment
Use this feature to change the ringing assignment of SL2100 Terminals.
You may want to change this setting if:
You want one or more outside (CO) lines to ring at one or more telephones.
You want a dedicated outside (CO) line to ring at a specific telephone.
You want outside (CO) lines to ring at a different locations throughout the day or on the weekend.
2.6.1
System Operation
The ringing assignment is achieved by pointing the Outside(CO) line to Incoming Ring Groups. The ring group
then contains the telephones that will ring.
Route each Outside(CO) line to an Incoming Ring Group (IRG) in Program 22-05-01. A line can route to a
different IRG in each night mode.
You then place telephones into IRG’s in program 22-04-01, a phone can be a member of more than one IRG.
Up to 48 telephones can be entered per IRG.
2.6.2
Program 22-05-01
Use this program to assign the incoming ring group (IRG) number to the outside (CO) lines. Different IRGs can
be assigned to each exchange line to provide different ring assignments throughout the day.
2.6.2.1
Default Setting
Each Line (e.g.,CO1-CO3) is assigned to incoming Ring Group (IRG) number 1.
There are up to eight settings available.
IRG number 1 is used for all eight settings.
Each exchange line ring at IRG 1 and telephone number 101-108, regardless of the time of day.
No. Operation
Display Shows;
1
Log Into Programming Mode.
If you have already logged into Programming Mode, skip this
operation.
2
Dial
22 05 01
.
Change the Trunk Number (1-3), if required.
3
Press
DND
key to move the cursor to Mode Number. Change the
Mode Number (1-8), if requred,
4
Press
DND
key to move the cursor to IRG Number. Change the IRG
Number (1-50), if required.
5
Press
Hold
key to confirm the entry and step to the next option.
6
When you are done, press
Mute
key several times to return to
Programming Mode.
7
Press
Speaker
key to save changes and exit from Programming
Mode.
Route each line to a Ring Group.
You can have a different Ring Group
per night mode.
<By Program 22-05-01>
Assign telephones to the Ring
Group.
<By Program 22-04-01>
22-05-01 Trunk
1
Mode1 =1
←
- +
→
22-05-01 Trunk1
Mode
1
=1
←
- +
→
22-05-01 Trunk1
Mode1 =
1
←
- +
→
_
________________________
______
Program Mode
_______
_
Base
_
Service
_
OP1
__
OP2
__
