SL2100 GETTING STARTED GUIDE
63
PRG 14-02-10
Trunk
number
Setting
Default= 1 On
Trunk 1
Trunk 2
Trunk 3
Trunk 4
Turn on the Caller ID for each Analog telephone.
PRG 15-03-09
Telephone
Setting
Default=0 Off
101
102
103
104
105
106
107
108
2.12 Recall for Analog Telephones
This feature allows you to change the recall setting. You may want to change this setting when you have analog
telephones connected and the
RECALL
key does not work correctly. This is highlighted when you press the
RECALL
key but the call is not placed on hold. Recall is also referred to as Timed Break Recall (TBR).
The SL2100 must be configured with the correct recall timing that matches the analog telephones that you have
connected.
2.12.1 Program 82-04-0x
Set the system to detect a recall duration of 105ms to 1000ms. You will need to change three options within
this program. The SL2100 will accept a recall duration of 540mS to 660mS(600ms±10%).
2.12.1.1 Default Setting
The SL2100 will accept a Recall duration of 105ms to 660ms.
No. Operation
Display Shows;
1
Log into Programming Mode.
If you have already logged into Programming Mode, skip this
operation.
2
Dial 82 04 04, Enter the Maximum Break Time (default: 100ms (
20
))
and press
Hold
key three times to confirm the entry and step to the
next option.
3
Change the setting to
21
(this is equivalent to 105mS) and press
Hold
key to confirm the entry and step to the next option.
_
________________________
______
Program Mode
_______
_
Base
_
Service
_
OP1
__
OP2
__
82-04-04
Max. Break Time
2
0
←
→
82-04-07
Min. Flash Time
21
←
→
