NEC SILENTWRITER SUPERSCRIPT 660, User Manual

Page: 50 / 313

2–30 Setting Up
Silentwriter SuperScript includes a software installa-
tion program to make setup easier. The installation
program analyzes your system configuration, installs
the SuperScript software and fonts, and makes any
necessary changes to Windows startup files.
Once you have started the NEC SuperScript 660
setup program, you can cancel the installation at any
time. Just click on the
Cancel
button that appears in
the setup program window.
NOTE: You must have a minimum of 4 megabytes
of RAM and sufficient disk space for SuperScript.
(See this chapter “System Requirements”.)
SuperScript software checks your system and will
report if an adjustment is required.
To install the SuperScript software:
1. Place the NEC SuperScript software diskette #1
into the appropriate disk drive of your computer,
for example A:. Close the drive door or lever if
the drive has one.
2. Start Microsoft Windows. At the DOS prompt,
type:
WIN/3
Windows will start up as usual, after which the
Program Manager window should be displayed
on your screen. If the Program Manager appears
as an icon, restore it by double-clicking on the
icon.
3. From the Program Manger menu, click on File .
Then click on the Run ... Option. The Run
Program dialog box appears.
INSTALLING
SUPERSCRIPT
PRINTING
SOFTWARE