NEC SILENTWRITER SUPERSCRIPT 660, User Manual

Page: 127 / 313

Selecting Paper and Media 6–11
ITEM
Acid content
Ash content
Single-sheet feed*1
Multi-sheet feed*2
Brightness
Calliper
Furnish
Curl
Cut edge condition
Electrical surface resistivity
Electrical volume resistivity
Finishing
Fusing capability
SPECIFICATION
5.5 pH to 8.0 pH.
Cannot exceed 10% or contain large amounts of
clay or talc.
60 to 105 g/m 2 (16 to 28 pound).
60 to 82 g/m
2
(16 to 22 pound).
83% minimum.
3.7 to 7.5 mils.
100% chemical wood pulp with up to 25% cotton
fiber recommended.
Zero curl toward image side, minimum 15-inch
radius curl toward opposite side.
Sharp edges, no visible fray.
2.0 to 15
×
10
10
ohms/square (conditioned at 22˚C
(71.6˚F) plus 50% relative humidity).
1.2 to 15
×
10
11
ohm
×
centimeter (conditioned at
22˚C (71.6˚F) plus 50% relative humidity).
Cut sheets must be within ±0.0313 inches of
nominal, corners at 90˚ ±0.2˚.
Cannot scorch, melt, offset, or release emissions
when heated to 200˚C (392˚F) for 0.1 second.
*1 “Single-sheet Feed” refers to the method of placing print media in the hopper
one sheet at a time.
*2 “Multi-sheet Feed” refers to the method of placing print media in the hopper
several sheets at a time for continuous feeding.
Sheet Paper
All sheet paper properties must match the paper
specifications listed in Table 6-1.
Table 6-1 Paper Specifications