7. Resetting and Clearing the Server
Express5800/R120d-1E, R120d-2E Maintenance Guide
42
Chapter 1 Maintenance
7.
Resetting and Clearing the Server
Refer to this section if the server does not work or if you want to set BIOS settings back to the factory settings.
7.1
Software Reset
If the server halts before starting the OS, press <Ctrl> + <Delete> + <Alt> keys. Resetting the server clears the
memory.
Note
To reset the server when it is not frozen, make sure that no processing is in
progress
7.2
BMC Reset
Press BMC RESET Switch only if a problem occurs in EXPRESSSCOPE Engine 3 (BMC).
Do not press BMC RESET Switch in usual operation.
To reset the BMC, press BMC RESET Switch at least five seconds.
Tips
BMC RESET Switch only resets BMC and that does not reboot the server.
Express5800/R120d-1E (2.5-inch Drive Model)
Express5800/R120d-1E (3.5-inch Drive Model)
BMC RESET
スイッチ
BMC RESET
スイッチ
