5. Troubleshooting
Express5800/R120d-1E, R120d-2E Maintenance Guide
27
Chapter 1 Maintenance
[?]
The following devices are indicated as faulty devices in a Windows Server 2008 R2 Server Core
installation environment
•
SM Bus Controller
•
PCI Simple Communications Controller
•
Base System Device
•
System Interrupt Controller
•
Performance
Controller
→
There is no operational problem.
[?]
Unable to access the partition which was previously created after reinstalling while several disks are
connected
→
For details, refer to the Microsoft website below:
http://support.microsoft.com/kb/2497048/ja
(Japanese only)
[?]
When Windows Server 2008 R2 is installed while several disks are connected, the system partition and
the boot partition (100 MB) are sometimes created in another disk
→
For details, refer to the Microsoft website below:
http://support.microsoft.com/kb/2530901/ja
(Japanese only)
[?]
When Starter Pack is executed on Windows Server 2008 R2, the below message is sometimes displayed
for a moment upon shutdown
→
No problems for system operation.
For details, refer to the Microsoft website below:
http://support.microsoft.com/kb/975777/en-us
[?]
Windows Server 2003 R2 DISC 2 was installed after the Windows Server 2003 Service Pack had been
applied
→
Reapply the Service Pack. If you applied the Service Pack even once after installing Windows Server
2003 R2 DISC 2, you need not reapply it.
* If the Service Pack application is unknown when you install Windows Server 2003 R2 DISC 2, NEC
recommends that the Service Pack be reapplied.
[?]
The system was installed as Workgroup although it is set to join the domain
Is the LAN cable properly connected?
→
If the LAN cable is not connected, the system is installed in workgroup setting, not in domain join setting.
After the OS is started, join the domain.
1 program still needs to close:
(Waiting for) Task Host Window
