1. Error Message
Express5800/R120d-1E, R120d-2E Maintenance Guide
127
Chapter 3 Appendix
(1) POST Error messages
POST error message contains POST error code. For example, "
AE01
" indicates POST error code in error message
"
AE01: CPU1_DIMM1 has been disabled.
".
8002: Check date and time settings
[Description]
Incorrect date and time set on real time clock was detected.
[Recommended action]
Run SETUP, and specify the correct date and time.
If it does not resolve your problem, contact your sales representative.
8006: System configuration data cleared by Jumper.
[Description]
The configuration data in SETUP was cleared by the jumper switch setting.
[Recommended action]
Follow the steps described in
Chapter 1 (7. Resetting and Clearing the Server).
Run SETUP, and setup each item again.
If it does not resolve your problem, contact your sales representative.
This error message also appears when lithium battery is removed or reinstalled.
8007: SETUP Menu Password cleared by Jumper.
[Description]
The password data in SETUP was cleared by the jumper switch setting.
[Recommended action]
Follow the steps described in
Chapter 1 (7. Resetting and Clearing the Server).
Run SETUP and set password again.
If it does not resolve your problem, contact your sales representative.
8020: BIOS update error.
[Description]
BIOS update failed.
[Recommended action]
Displayed when updating BIOS. If the same error is detected consecutively, take an action according to
description in BIOS release note, or contact your sales representative.
8021: Recovery jumper is set, but recovery images is not found.
[Description]
The recovery jumper is set, but data required for updating BIOS could not be found.
