2-20 Setup and Operation
Parallel Port Type
The Parallel Port Mode field options are as follows.
Compatible (default)
−
sets the parallel port to the standard AT compatibility.
Bi-directional
−
sets the parallel port to input/output mode only.
ECP
−
sets the parallel port to the Enhanced Capabilities Port (ECP) mode.
EPP
−
sets the parallel port to the Enhanced Parallel Port (EPP) mode.
Advanced Chipset Configuration
The Advanced Chipset Configuration allows parameters that affect system performance to
be changed. Place the cursor in the Advanced Menu field and select the Advanced Chipset
Configuration by pressing
Enter
. The Advanced Chipset Configuration appears.
Advanced Chipset Configuration Submenu
The Advanced Chipset Configuration Submenu lets you check or change the following
chipset parameters:
Base Memory Size
ISA LFB Size
ISA LFB Base Address
Video Palette Snoop
Latency Timer (PCI Clocks)
Memory Error Detection
Onboard Audio
Banks 0 and 1 SIMM Detected.
Base Memory Size
The Base Memory Size field controls the mapping of addresses between “512 KB” and
“640 KB.” The default is 640 KB. The two choices are described as follows:
512 KB
−
directs address mapping between 512 KB and 640 KB to the ISA bus.
640 KB (default)
−
directs address mapping between 512 KB and 640 KB to the
system DRAM. Unless using an ISA expansion board that requires access to this
address range, this field should not be changed.
Summary of Contents for POWERMATE PROFESSIONAL - SERVICE 05-1997
Page 13: ...xiv Contents...
Page 203: ...C 4 Hard Disk Drive Specifications...