![background image](http://html1.mh-extra.com/html/nec/powermate-professional-service-05-1997/powermate-professional-service-05-1997_service-manual_4143936161.webp)
Repair 5-11
3.
Remove the four screws securing the 3 1/2-inch drive to the bottom of the system
chassis (see Figure 5-13). Remove the drive out from the side of the chassis.
Figure 5-13 Removing the 3 1/2-Inch Drive
5 1/4-Inch Device Removal
Remove a 5 1/4-inch device (CD-ROM reader or other device) from the 5 1/4-inch device
cage as follows:
1.
Remove the system unit cover, side panel, and front panel as previously described.
NOTE:
The 5 1/4-inch devices are installed with
drive rails.
2.
Disconnect the device signal and power cables from the inside of the system unit.
(If removing a CD-ROM reader, also disconnect the audio cable.)
3.
Remove the 5 1/4-inch device by releasing the guide rail tabs and slide the device
out from the front of the system unit.
Summary of Contents for POWERMATE PROFESSIONAL - SERVICE 05-1997
Page 13: ...xiv Contents...
Page 203: ...C 4 Hard Disk Drive Specifications...