Setup and Operation 2-7
STARTING UP
Press the power button (see Figure 2-9) to power on the system. The power lamp lights
green, indicating that the system is on.
The system automatically goes into its Power-On Self-Test (POST), and checks system
components. One beep indicates that the system has successfully completed the POST.
If a problem occurs, a series of beeps may sound. If this happens repeatedly after powering
on, power off the system and troubleshoot.
If a problem occurs and is not indicated by beeps, power off the system and troubleshoot.
NOTE:
If the system displays a message
indicating that system settings have changed, run
Setup (see “System Configuration” later in this
section).
Figure 2-9 Power Button
THE SETUP UTILITY
The Setup utility program allows you to enter system configuration information and control
special features of the system.
Summary of Contents for POWERMATE PROFESSIONAL - SERVICE 05-1997
Page 13: ...xiv Contents...
Page 203: ...C 4 Hard Disk Drive Specifications...