System Board Settings B-9
CMOS Access
Access Allowed
D
(default)
Access Denied
D
Jumpers
1
2
3
4
5
6
1
2
3
4
5
6
Figure B-5 CMOS Setup Access Jumper
6.
Replace the system unit cover (see “Replacing the System Unit Cover” in
Section 3).
7.
Connect system power cables and monitor.
8.
Power on the system. The system displays a system configuration error message.
9.
Power off, unplug the system and monitor, and remove the cover.
10.
Remove the jumper block from pins 4-5 and replace it on pins 5-6.
11.
If you removed any expansion boards, replace them (see “Replacing Expansion
Boards” in Section 3).
12.
Replace the system unit cover. Reconnect the system power cables and
peripheral devices.
13.
Power on the system.
14.
Run Setup (see Section 2).
Summary of Contents for POWERMATE PROFESSIONAL - SERVICE 05-1997
Page 13: ...xiv Contents...
Page 203: ...C 4 Hard Disk Drive Specifications...