2-16 Setup and Operation
Typematic Rate Programming
The parameter controls whether the default user configuration values are used for
Typematic Rate Delay and Typematic Rate.
Default
−
sets the Typematic Delay to 500 msec and Typematic Rate to 15.
Override
−
provides the following two options. These options allow you to
customize the values.
Typematic Rate Delay
The Typematic Rate Delay field controls how long it takes for the keyboard auto-repeat
function to start when a keyboard key is held down. The delay times are as follows:
250 msec (default)
500 msec
750 msec
1000 msec.
Typematic Rate
The Typematic Rate Delay field controls the speed characters repeat when you hold down a
keyboard key. The higher the number is, the faster the repeat. Delay times are as follows:
6 char/sec (default)
8 char/sec
10 char/sec
12 char/sec
15 char/sec
20 char/sec
24 char/sec
30 char/sec.
Power-On COM1 Ring
If a telephony device is installed, this field enables the system to power on in response to an
incoming call. This field can be either “Enabled” or “Disabled.” The default is “Disabled.”
Summary of Contents for POWERMATE PROFESSIONAL - SERVICE 05-1997
Page 13: ...xiv Contents...
Page 203: ...C 4 Hard Disk Drive Specifications...