2-6 Setup and Operation
Figure 2-7 Attaching the Microphone and Y-Cable
1.
Locate the AC adapter (see Figure 2-8).
2.
Plug the AC adapter into the jack marked “+15 DC” on the back of the right
speaker.
3.
Plug the other end of the cable into a properly grounded wall outlet.
Figure 2-8 Connecting the AC Adapter
Power on the speakers after the operating system has been loaded. To operate the speakers,
push the power button on the front of the right speaker and adjust the volume control.
This completes setup procedures.
Line Out
Mic In
Summary of Contents for POWERMATE PROFESSIONAL - SERVICE 05-1997
Page 13: ...xiv Contents...
Page 203: ...C 4 Hard Disk Drive Specifications...