![background image](http://html.mh-extra.com/html/nec/powermate-p2166/powermate-p2166_manual_248700154.webp)
Setting System Board Jumpers 5-5
!
CAUTION
The wrong Processor Voltage (VR/VRE) jumper
setting could damage the system board processor.
Be sure Processor Voltage jumper is set correctly
for your processor.
5.
Reinstall any removed expansion boards (see “Replacing
Expansion Boards” in Chapter 3).
6.
Replace the system unit cover (see “Replacing the
Desktop Cover” or “Replacing the Minitower Cover” in
Chapter 3).
7.
Power on the system.
BIOS RECOVERY
If an interruption occurs during the BIOS upgrade that
prevents continuation of the process, it is possible that the
BIOS may be left in an unstable state. Use the following
procedure to recover your BIOS.
1.
Power off the system and unplug any peripherals.
!
WARNING
The system power must be off before removing the
cover and changing a jumper setting.
2.
Remove the system unit cover (see “Removing the
Desktop Cover” or “Removing the Minitower Cover” in
Chapter 3).