Installing Options 3-23
5.
Replace the slot cover removed when the expansion
board was installed.
6.
Replace the system unit cover.
Removing an Expansion Board from the Inside Slot
Use this procedure if removing an expansion board from the
inside slot in your system.
1.
Remove the system unit cover.
2.
Label and remove any cables from the expansion board.
3.
Remove the two screws that secure the slot cover
support and expansion board bracket to the rear of the
system.
Remove the slot cover support from inside the system
unit.
!
CAUTION
Take care not to drop the slot cover support into the
system, as it could damage the system board.