manualshive.com logo in svg

NEC POWERMATE P2166, Manual

The NEC POWERMATE P2166 user manual is available for free download from our website. This comprehensive manual provides detailed instructions and guidance for operating and navigating the features of this powerful computer. Get your free copy of the manual at manualshive.com and unlock the full potential of your NEC POWERMATE P2166.

Share
Download
background image

    

 Installing Options   3-39

Preparing the Device

 Before installing a storage device in the system, follow any
preinstallation instructions that come with the device. For
example, check the following:

„

Diskette drive

  

remove any termination on the optional

diskette drive. See the documentation that comes with
the drive.

„

IDE device

  

check the jumper settings on the device

before installing it. See the documentation that comes
with the device for jumper setting information.

 An IDE device, such as an IDE hard disk or IDE
CD-ROM reader, must be set correctly as the first
(master) or second (slave) device on the IDE channel.

 The standard IDE hard disk (in hard disk models) is set
as the master device on the primary IDE connector. The
CD-ROM reader in multimedia models is the master
device on the secondary IDE connector.

Device Cables

 The cables used for installation of optional storage devices
include:

„

diskette drive signal cable

„

IDE signal cables

„

system power cables.

 The diskette drive and IDE cables shipped with the system
each support two devices. Cable connector locations on the
system board are shown in the following figure.

Summary of Contents for POWERMATE P2166






























































































































































































































Reviews:

No comments

Related manuals for POWERMATE P2166

IBM ThinkPad 380 Hardware Maintenance Manual preview
ThinkPad 380
Brand: IBM Pages: 717
Acer Power Sx User Manual preview
Power Sx
Brand: Acer Pages: 102
Jason.L Literail Workstation 4 Person Assembly Instructions preview
Literail Workstation 4 Person
Brand: Jason.L Pages: 4
Sysgration UPC-W101 User Manual preview
UPC-W101
Brand: Sysgration Pages: 27
Vivo DESK-V000EB Instruction Manual preview
DESK-V000EB
Brand: Vivo Pages: 3
Acorn Computers Limited PLUS 1 User Manual preview
PLUS 1
Brand: Acorn Computers Limited Pages: 30
Sony PCV-RS422X - Vaio Desktop Computer Specifications preview
PCV-RS422X - Vaio Desktop Computer
Brand: Sony Pages: 1
Sony PCV-RS421 - Vaio Desktop Computer Specifications preview
PCV-RS421 - Vaio Desktop Computer
Brand: Sony Pages: 1
Sony PCV-RS420 - Vaio Desktop Computer Specifications preview
PCV-RS420 - Vaio Desktop Computer
Brand: Sony Pages: 1
Sony PCV-RS411 - Vaio Desktop Computer Specifications preview
PCV-RS411 - Vaio Desktop Computer
Brand: Sony Pages: 1
Sony PCV-RS320 - Vaio Desktop Computer Specifications preview
PCV-RS320 - Vaio Desktop Computer
Brand: Sony Pages: 1
Sony PCV-RS400CG - Vaio Desktop Computer Specifications preview
PCV-RS400CG - Vaio Desktop Computer
Brand: Sony Pages: 2
Sony PCV-RS314P Specifications preview
PCV-RS314P
Brand: Sony Pages: 1
Sony PCV-RS310 - Vaio Desktop Computer Specifications preview
PCV-RS310 - Vaio Desktop Computer
Brand: Sony Pages: 1
Sony PCV-RS210 - Vaio Desktop Computer Specifications preview
PCV-RS210 - Vaio Desktop Computer
Brand: Sony Pages: 1
Sony PCV-R558DS - Vaio Digital Studio Desktop Computer Specifications preview
PCV-R558DS - Vaio Digital Studio Desktop Computer
Brand: Sony Pages: 1
Sony PCV-R556DS - Vaio Digital Studio Desktop Computer Specifications preview
PCV-R556DS - Vaio Digital Studio Desktop Computer
Brand: Sony Pages: 1
Sony PCV-R549DS Online Help Center (VAIO User Manual) Specifications preview
PCV-R549DS Online Help Center (VAIO User Manual)
Brand: Sony Pages: 1

Brands by name

Popular brands

Load more brands