5-4 Repair
Expansion Board Removal
Remove the sound/fax/modem board and any other installed expansion board(s) per the
following steps.
1.
Remove the system unit side panel (see “Side Panel Removal” in this section).
2.
If you have any cables connected to the board that you need to remove, label the
connectors before you remove them.
3.
Remove the screw that secures the board to the support bracket (see Figure
Section 5-2).
4.
Pull the board out of the connector. Gently rock the board from side-to-side to
release it from its connector.
Figure Section 5-2 Expansion Board Removal
Summary of Contents for POWERMATE P - SERVICE MANUAL 1995
Page 37: ...1 22 Technical Information ...
Page 169: ...Index 5 ...