Option Installation 3-21
Storage Device Installation
Click on an appropriate procedure for installing a storage device in the system.
n
Installing the 3 1/2-Inch Drive
n
Installing the 5 1/4-Inch Device
Removing the 3 1/2-Inch Drive Bracket
The installation of a second 3 1/2-inch hard disk drive requires the removal of the 3 1/2-inch
drive bracket.
Remove the 3 1/2-inch drive bracket containing the standard 1.44-MB diskette drive and
hard disk drive as follows.
1.
Remove the system unit side panel (see “Removing the Side Panel”).
2.
Label and disconnect the cables attached to the diskette drive and any hard disk
drive installed in the 3 1/2-inch bracket.
3.
Remove the screw securing the drive bracket to the 5 1/4-inch device cage and
slide the bracket toward the rear of the system (see the following figure).
Figure Section 3-9 Removing the 3 1/2-Inch Drive Bracket
4.
Continue to “Installing the 3 1/2-Inch Drive.”
Drive
Bracket
Device
Cage
Summary of Contents for POWERMATE P - SERVICE MANUAL 1995
Page 37: ...1 22 Technical Information ...
Page 169: ...Index 5 ...