Option Installation 3-31
4.
Attach the Y-cable as follows.
n
Insert the red connector into the red jack marked “RIGHT LINE IN” on the
back of the right speaker.
n
Insert the white connector into the white jack marked “LEFT LINE IN” on
the back of the right speaker.
n
Insert the other end of the cable into the Line Out jack on the rear of the sys-
tem unit (see “System Setup” in Section 2).
Figure Section 3-23 Attaching the Y-Cable
5.
Locate the AC adapter.
6.
Plug the AC adapter into the jack marked “+15 DC” on the back of the right
speaker.
To System Unit
Line Out Jack
(connector with
two rings)
Right Speaker
Summary of Contents for POWERMATE P - SERVICE MANUAL 1995
Page 37: ...1 22 Technical Information ...
Page 169: ...Index 5 ...