3-20 Option Installation
3.
Connect the appropriate power cable to the power connector on the IDE device.
Figure Section 3-7 Connecting IDE Device Cables
4.
If you are installing an IDE CD-ROM reader, also connect the audio cable (see
the instructions that come with the reader).
Cabling a Diskette Drive
1.
Connect the appropriate connector on the Diskette Drive Signal Cable to the sig-
nal connector on the diskette drive. Align the colored edge of the cable with the
pin 1 side of the device connector.
2.
Locate an available power connector coming from the power supply (see “System
Power Cables”).
3.
Connect the appropriate power cable to the power connector on the device.
Figure Section 3-8 Connecting 1.2-MB Diskette Drive Cables
Power Cable
IDE Cable
Red Edge
Power Cable
1.2-MB Diskette
Drive Connectorer
Red Edge
Diskette Drive
Signal Cable
Summary of Contents for POWERMATE P - SERVICE MANUAL 1995
Page 37: ...1 22 Technical Information ...
Page 169: ...Index 5 ...