20
BASIC OPERATION
Position Adjustment
Adjust the position(SHIFT) and the screen area (BLANKING).
Proceed as follows:
1
Press the OPERATE button.
• The “OPERATE” menu is displayed.
2
Use the CURSOR
or
button to highlight the “2/POSITION”
line and press ENTER to display the “POSITION” menu. You
can also select the “POSITION” menu directly by pressing the
INPUT “2” button.
• The “3/SOUND” item is not included in the stand alone operate
menu.
3
Use the CURSOR
or
button to select either “SHIFT” or
“BLANKING” and then press ENTER. You can also select each
item directly by pressing the INPUT “1” or “2” button.
• The selected adjustment screen will be displayed.
Items to select
• SHIFT(Position of the picture)
• BLANKING(Screen area)
4
Adjust the position or screen area.
When selecting SHIFT:
Use the CURSOR buttons to move the position of the picture.
• Pressing
or
moves the picture left or right.
• Pressing
or
moves the picture up or down.
NOTE: Adjust to position the picture in the center of the raster.
Over shift-adjusting to the top of the raster may cause the top
of the picture to curve depending on the type of input signal.
– O P E R A T E –
1 / P I C T U R E
2 / P O S I T I O N
3 / S O U N D
4 / I N P U T S E L E C T
5 / S O U R C E I N F O
6 / S T A T I C
– P O S I T I O N –
1 / S H I F T
2 / B L A N K I N G
P O S I T I O N
- S H I F T -
H
V
`
1 0 %
1
9 0 %
