91
On-screen Display Mode Setting
SETTING
There are two modes of operations for the on-screen display. With
AUTO mode, the on-screen display will automatically switch off
after ten seconds. In the MANUAL mode, the display must be
manually turned off with the DISPLAY button on the full function
remote control each time it appears.
NOTE: Pressing DISPLAY with CTL will select the non on-screen
mode; pressing DISPLAY with CTL again will cancel this mode.
Even if the on-screen display may be turned off with CTL and
DISPLAY, any adjustment will still change the projector’s memory
settings.
Proceed as follows:
1
Press the ADJUST button to display the “ADJUST” menu.
• The projector may ask you to enter your passcode.
See page 52 for the explanation of the PASSCODE.
2
Use the CURSOR
or
button to highlight the “9/OPTION”
line. Press ENTER to display the “OPTION” menu. You can also
select the “OPTION” menu directly by pressing the INPUT “9”
button.
• The eighth item is “8/OPTION” in stand alone adjust menu.
3
Use the CURSOR
or
button to highlight the “2/MENU
MODE” line. Press ENTER to display the “MENU MODE”
menu. You can also select the “MENU MODE” menu directly by
pressing the INPUT “2” button.
4
Use the CURSOR
or
button to highlight the “MESSAGE
MODE” item.
Press ENTER to display the “MESSAGE MODE” menu.
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / W H I T E B A L
6 / R , G , B G A I N
7 / H O U R M E T E R
8 / P A S S C O D E
9 / O P T I O N
– O P T I O N –
1 / S E T T I N G M O D E
2 / M E N U M O D E
3 / S E Q U E N C E R
4 / P J A D D R E S S
5 / V E R S I O N
OPTION
- MENU MODE -
MESSAGE MODE
MESSAGE COLOR
DATE, TIME DISPLAY
DATE, TIME PRESET
DATE : MM/DD/YY
TIME : 24HOUR
AUTO 10 SEC
COLOR
DATE : ON
DAY : OFF
TIME : ON
