NEC PG-6200 User Manual Download Page 57

Page: 57 / 143

BASIC OPERATION

Picture and Sound Mute

Normal, Load, and Cancel Function

Adjustment settings can be returned to the factory preset level, or the

previously stored level, or can be cancelled.

To return to the standard level (NORMAL):

Press the NORMAL button.

• A confirmation message will be displayed.

Use the CURSOR

button to select “YES”.

Press ENTER.

• The NORMAL function is performed.

• If you select “NO”, you will exit this mode suspending current

status.

To return to the last stored level (LOAD):

Press and hold the CTL button then press the NORMAL button.

• The “LOAD/CANCEL” menu is displayed.

Use the CURSOR

button to select “LOAD”.

• A confirmation message is displayed.

Use the CURSOR

button to select “YES”.

• If you select “NO”, you will exit this mode suspending current

status.

Press ENTER.

• The LOAD function is performed.

To cancel the adjustment data (CANCEL):

Press and hold the CTL button then press the NORMAL button.

• The “LOAD/CANCEL” menu is displayed.

Use the CURSOR

button to select “CANCEL”.

• A confirmation message is displayed.

Use the CURSOR

button to select “YES”.

• If you select “NO”, you will exit this mode suspending current

status.

Press ENTER.

• The CANCEL function is performed.

XXXXXXXX refers to a specific adjustment item to be

loaded or cancelled

XXXXXXXX refers to a specific adjustment item to be

loaded

XXXXXXXX refers to a specific adjustment item to be

cancelled

XXXXXXXX refers to a specific adjustment item to be

normalized

X X X X X X X X
D A T A N O R M A L I Z E ?

Y E S

N O

X X X X X X X X
D A T A L O A D ?

Y E S

N O

X X X X X X X X
D A T A C A N C E L ?

Y E S

N O

X X X X X X X X

L O A D

C A N C E L

This function mutes a picture or sound.

To mute picture or sound:

• Pressing PICTURE MUTE mutes picture.

Pressing SOUND MUTE mutes sound.

Pressing again PICTURE MUTE/SOUND MUTE restores the picture or sound. Another way to restore picture or sound is to

press END.

NOTE: The OPERATE and the ADJUST menus can be accessed in the PICTURE MUTE mode.

Summary of Contents for PG-6200
















































































































































Search results

Summary of Contents for PG-6200

Reviews:

Related manuals for PG-6200

Brands by name

Popular brands

NEC PG-6200, User Manual

Search results

Summary of Contents for PG-6200

Reviews:

Related manuals for PG-6200

Brands by name

Popular brands