29
123456
123456
123456
123456
123456
123456
SPECIFICATIONS
.
Projection type ............ Refraction type
Projector and screen are separated
Projection system ........ 3 lens and 3 CRTs in-line
Scanning frequency ..... H 15 to 69 kHz/V 38 to 160Hz
(PG-6200/PG-6200G)
H 15 to 100 kHz/V 38 to 160Hz
(PG-9200/PG-9200G)
Retrace time ................ H 4.0
µ
S (fH 15 to 30kHz)
H 2.5
µ
S (fH 30 to 100kHz)
V 350
µ
S
Video bandwidth .......... 100MHz (-3dB) PG-9200/PG-9200G
80MHz (-3dB) PG-6200/PG-6200G
CRT ............................. 7 inch liquid cooled
Deflection angle 90 degrees
Lens ............................ Hybrid lenses multilayer coating F1.0
Picture size .................. 60 to 300 inches diagonal
Resolution ................... 1000TV lines
Pixel resolution ............ 1600
2
1200 dots(PG-9200/PG-9200G)
1280
2
1024 dots (PG-6200/PG-6200G)
Light output ................. 1000 lumens
(Small area peak high light brightness)
Contrast ratio ............... 20 : 1 (HDTV method)
High voltage ................ 32kV
Input ............................ RGB signal 0.7Vp-p 75ohm positive (BNC)
H/V sync 0.7 to 4.0Vp-p 75 ohm/1 K ohm
negative or positive (BNC)
COMP sync 0.7 to 4.0Vp-p 75ohm/1 K ohm
negative or positive (BNC)
Sync on G 0.3 to 0.6Vp-p 75ohm negative (BNC)
Video 1.0Vp-p 75ohm positive (BNC) or
(switchable)
S-video: Y 1.0Vp-p 75ohm positive
C 0.28Vp-p 75ohm (burst level)
Video system NTSC, PAL, SECAM and
NTSC4.43
Convergence ................ Digital convergence (Pre-set 100 positions)
Quick copy convergence
Static and wave convergence
Point convergence: PG-6200/PG-6200G
Optional
PG-9200/PG-9200G Standard
Convergence limits ...... Less than 0.2% of V-height
Warm up time .............. 20 minutes
Setup signal ................. Cross hairs, Cross hatch, Dot, Window Pattern,
H test pattern
Power supply ............... AC 120V 60Hz (PG-6200/PG-9200)
AC 220-240V 50Hz (PG-6200G/PG-9200G)
Power consumption .... PG-6200/PG-6200G 500W
PG-9200/PG-9200G 550W
Input current ............... 6.8A (AC 120V) PG-6200
7.6A (AC 120V) PG-9200
4.0A (AC 220-240V) PG-6200G
4.4A (AC 220-240V) PG-9200G
Safety and regulation ... PG-6200/PG-9200;
Meets FCC class A requirements
UL Approved (UL 1950, CSA 950)
DHHS Approved
Meets DOC (Canada)
Meets RED ACT
PG-6200G/PG-9200G;
Meets EMC Directive (EN55022,EN61000-3-
2, EN61000-3-3, EN55082-1, pr EN55024-
2, pr EN55024-3, pr EN55024-4)
Meets Low Voltage Directive (EN60950,
TÜV GS Approved)
PTB Approved
Cabinet dimensions ..... 610(W)
2
754(D)
2
309(H) mm
24 1/8(W)
2
29 5/8(D)
2
12 1/8(H) inch
Weight ......................... 56 kg/123.5 lbs
Remote control ............ Wired application
Wireless (operating distance 7m/23ft.)
Remote control functions . User remote (RG-6020); Power ON/OFF, Input
signal select, Picture mute, Bright, Contrast,
Color 1), Sharpness 1), Tint 2), Volume 3),
Sound mute 3), Source information, Static
convergence, Normalize, Enter, End
Full function remote (RC-6051); Test, Display,
Help, Information, Input list, Static focus, Edge
focus, H/V position, White balance select, Static
convergence, Wave convergence, Point
convergence, H/V amplitude, H/V linearity, H/V
key-stone, H/V pin-cushion, H/V blanking, Tilt,
Skew, H/V bow, Store, Normalize, Enter, End
Main control function .. Power ON/OFF, Input signal select, Picture
mute, Bright, Contrast, Color 1), Sharpness 1),
Tint 2), Volume 3), Sound mute 3), Source
information, Static convergence, Normalize,
Enter, End
External control ........... Power ON/OFF, Input signal select, Picture
mute, Remote control data input
PC control ................... Acceptable
Supplied accessories ... Full function remote control unit (RC-6051),
User remote control unit (RC-6020), Remote
cable 4m/13ft., Remote cable 16m/52ft., AC
line cable, Operation manual, Set-Up manual*,
Installation manual*
Environment ................ Temperature 0 to 40 degrees C
Humidity 0 to 90% non-condensing
Storage -10 to 50 degrees C
Sound emission ........... PG-6200/PG-9200 45dB
PG-6200G/PG-9200G 70dB (A). Complies with
ISO 3744 or ISO 7779
1) This works only for VIDEO signals.
2) This works only for NTSC video signals.
3) This works only with the Switcher operation.
Specifications are subject to change without notice.
The dimensions given for the projector do not include
protruding parts.
*Set-Up manual and Installation manual are not included
with PG-9200G/PG-6200G.
