manualshive.com logo in svg

NEC NEAX Express, Service & Reference Manual

The NEC NEAX Express is an advanced communication system designed for efficient business operations. With its user-friendly interface, this product ensures seamless connectivity. Access the comprehensive User Manual for free download at manualshive.com. Discover step-by-step instructions and maximize the potential of your NEC NEAX Express system with ease.

Share
Download
background image

System Setup Utility   B-17

Sensor Data Record (SDR) Window

Clicking on the SDR Manager task brings up the Sensor Data Record (SDR)
viewer. You can load and view the current SDR data stored in the BMC, save
the currently loaded SDR data to a file, view previously saved SDR data. The
SDR Viewer has the following menus:

1. 

From the SDR Main Menu, launch the SDR by selecting the “SDR Viewer
Add-in” task under the SDR heading in the task box. Click OK. The SDR
Viewer Add-in window (Event Log) displays.

2. 

The following screen choices are available:

Screen Choice

Options

File Menu

Load SDR:

  View data from a previously saved SDR file.

Save SDR:

  Save the currently loaded SDR data to a

file.

Clear SDR: 

 Clears the SDR data from the BMC.

Exit:

  Quits the SDR Viewer.

View Menu

SDR Info:

  Displays information about the SDR. These

fields are display only.

All Events:

  Displays the current SDR data from the

BMC.

By Sensor:

  Brings up a pop-up menu that allows you to

view only the data from a certain sensor type.

By Event:

  Brings up a pop-up menu that allows you to

view only the data from a certain event type.

Settings menu

Display HEX/Verbose:

  Toggles between the

Hex/interpreted mode of displaying the SDR records.

Output Text/Binary:

  Determines whether SDR data will

be saved to the file (as under File - Save) in binary
format or verbose format.

Help

About

: Displays the SDR Viewer version information.

Summary of Contents for NEAX Express



















































































































































































































































Reviews:

No comments

Related manuals for NEAX Express

IBM 315 Hardware Maintenance Manual Supplement preview
315
Brand: IBM Pages: 151
Gateway 7250R Rack Mounting Instructions preview
7250R
Brand: Gateway Pages: 26
IBM BladeCenter QS20 Installation And User Manual preview
BladeCenter QS20
Brand: IBM Pages: 92
IBM BladeCenter JS20 Maintenance And Troubleshooting Manual preview
BladeCenter JS20
Brand: IBM Pages: 218
IBM HS21 - BladeCenter - 8853 User Manual preview
HS21 - BladeCenter - 8853
Brand: IBM Pages: 80
IBM 8835 - Eserver 325 - 1 GB RAM Option Installation Manual preview
8835 - Eserver 325 - 1 GB RAM
Brand: IBM Pages: 62
IBM 8835 - Eserver 325 - 1 GB RAM Technical Update preview
8835 - Eserver 325 - 1 GB RAM
Brand: IBM Pages: 2
IBM 8676 - Eserver xSeries 335 Installation Manual preview
8676 - Eserver xSeries 335
Brand: IBM Pages: 92
IBM 8670 - Eserver xSeries 345 User Manual preview
8670 - Eserver xSeries 345
Brand: IBM Pages: 60
IBM 8647 - Eserver xSeries 225 Maintenance And Troubleshooting Manual preview
8647 - Eserver xSeries 225
Brand: IBM Pages: 182
IBM 8480 - Eserver xSeries 205 User Manual preview
8480 - Eserver xSeries 205
Brand: IBM Pages: 64
IBM 79463AU Brochure preview
79463AU
Brand: IBM Pages: 2
IBM 71455RU Installation And User Manual preview
71455RU
Brand: IBM Pages: 136
IBM RS/6000 SP Handbook preview
RS/6000 SP
Brand: IBM Pages: 480
IBM 450 xSeries User Manual preview
450 xSeries
Brand: IBM Pages: 68
IBM @Server pSeries 630 6C4 Installation Manual preview
@Server pSeries 630 6C4
Brand: IBM Pages: 180
IBM eServer 380 xSeries Installation Manual preview
eServer 380 xSeries
Brand: IBM Pages: 54
N-Tron ESERV-11T User Manual preview
ESERV-11T
Brand: N-Tron Pages: 55

Brands by name

Popular brands

Load more brands