57
11.
Install the removed front fan unit.
12.
Unlock the two thumbscrews on the front fan unit.
13.
Secure the front fan unit pushing a thumbscrew to the front fan unit and then turning a
screw to the lock position.
Unlock Lock
IMPORTANT:
Make sure that the front fan unit is completely
installed in its place by pulling it lightly.
14.
Install the removed front bezel and lock the security.
The installation procedure is now completed.
Remove a hard disk drive in the reverse of the installation procedure. To remove the hard disk drive,
push the lever to release the lock and hold the handle securely to pull out the hard disk drive.
NOTE:
If the lamp on the front face of the drive carrier lights amber,
the hard disk drive is defected. If the lamp is off though the server unit
is powered on, no power is supplied to the hard disk drive
