51
Removal of Intelligent Switch (L2)
Remove the intelligent switch (L2) in the following procedure.
1.
Shut down the intelligent switch (L2) and turn off the power.
2.
Perform steps 1 to 3 in the installation procedure.
3.
Disconnect cables from the intelligent switch (L2).
4.
Loosen a screw securing the intelligent switch (L2).
Screw
5.
Open the ejector and take out the intelligent switch (L2) from the blade assembly unit.
To operate the unit with the intelligent switch (L2) left removed, install the dummy
intelligent switch (L2).
6.
Install the removed cable guide as before.
7.
Install the removed rear fan and lock it to the blade assembly unit.
This completes the procedure.
