50
11.
Insert the rear fan unit into the blade assembly unit.
NOTE:
When the rear fan unit is completely inserted into the blade
assembly unit, it is locked and click occurs.
NOTE:
Make sure that the hook on the bottom of the rear fan unit is
completely inserted into the frame of the cable tray.
Cable
tray
Hook
12.
Enter the information on the installed intelligent switch on the "Blade management sheet"
shipped with the blade assembly unit.
If a seal is shipped with the intelligent switch, write down the proper information on the
seal, put the seal on the management seal, and keep it carefully.
This completes the installation.
