2-2.本製品の交換
コントローラが二重化されている場合のホットスワップによる交換手順について説明します。
2-2-1)故障交換の場合
(1)コントローラ背面のコントローラ異常LEDのいずれかが点灯していることを確認します。
(2)交換対象となるコントローラに接続されている本体装置をシャットダウンして、交換
対象のコントローラに接続されているSASケーブルを取り外します。
(3)ディスクアレイ装置が電源ONの状態で故障しているコントローラを取り外します。
(4)60秒以上待ってから新しいコントローラを実装します。
(5)コントローラ背面のコントローラLEDが点灯したことを確認します。
コントローラLEDが点灯しない場合、再度、抜き差しを行います。
(6)ディスクアレイ装置の管理ソフトウェアから、コントローラが認識されていることを確認し
ます。
36
Summary of Contents for N8190-148
