a) SAS-OUT Port
This product does not use SAS-OUT Port. Do not connect the cable.
b) RS232 Port
This product does not use RS232 port. Do not connect the cable.
c) LAN Port
This product does not use LAN port. Do not connect the cable.
d) HOST0 SAS Activity LEDs (Green x4)
These LEDs appear adjacent to the SAS HOST0 port. LEDs 1 to 4 are corresponding to SAS lanes 1
to 4.
e) HOST1 SAS Activity LEDs (Green x4)
These LEDs appear adjacent to the SAS HOST0 port. LEDs 1 to 4 are corresponding to SAS lanes 1
to 4.
f) Battery Module
The Battery Module provides protection of the cache con/
P47tents if the AC/DC power fails.
· The battery module comes to the end of life 3 years after the date on the
Set up Date Label. Do not use a battery module over its life. That battery
module may be not able to keep enough cache backup time. The battery
module is parts for a fee. When you need to change your battery module,
contact your dealer or a local sales office.
KEY
g) Set up Date Label
The date (year and month) of manufacture of battery is on this label.
For example, the label will be as follows;
Label sample:
If a battery is manufactured in November, 2007, its label will be;
Y 07 .M 11
Set up Date
42
Summary of Contents for N8190-148
