h) SAS HOST0 Port
To be connected to SAS cable.
i) SAS HOST1 Port
To be connected to SAS cable.
j) Controller Activity on Drive Bank0 LED (Amber)
This LED is lit Amber when RAID Controller has activity on the bank 0 disk drives. (HDD slot 3, 4, 7, 8,
11, and 12).
k) Cache Active "Dirty" LED (Amber)
This LED is lit amber when RAID Controller cache has data saved in memory but not written to the
disk array.
l) Controller Fault LED (Amber)
This LED is lit amber when RAID Controller fault has occurred.
m) Battery Fail LED (Amber)
This LED is lit Amber when battery module has failed.
n) Controller OK LED (Green)
This LED is lit green when RAID Controller operation is normal.
o) Controller Activity on Drive Bank1 LED (Amber)
This LED is lit green (Amber) when RAID Controller has activity on the bank 0 disk drives. (HDD slot 1,
2, 5, 6, 9, and 10).
43
Summary of Contents for N8190-148
