a)SAS OUT コネクタ
本製品では使用しません。
b)保守ポート
本製品では使用しません。
c)LAN ポート
本製品では使用しません。
d)HOST ポート 0 LED(緑×4)
SAS HOST0 ポート上で各 lane の SAS 接続が確立したときに点灯します。
LED の 1~4 が SAS の lane 1~lane 4 に対応します。
e)HOST ポート 1 LED(緑×4)
SAS HOST1 ポート上で各 lane の SAS 接続が確立したときに点灯します。
LED の 1~4 が SAS の lane 1~lane 4 に対応します。
f)バッテリモジュール
キャッシュ上のデータを保持するためのリチウムイオンバッテリモジュールです。
・リチウムイオンバッテリモジュールの寿命(目安)は、Set up Date
ラベルの記載日付より 3 年です。
キャッシュデータを正常に保持できなくなる可能性がありますので、
ラベルに記載されている日付から 3 年を過ぎたバッテリモジュールは
使用を中止して新しいバッテリモジュールに交換してください。なお、
バッテリモジュールは有償部品となります。バッテリモジュールを交換
する際には保守サービス会社にご相談ください。
g)Set up Date ラベル
バッテリモジュールの製造年月が記載されています。
ラベルの記載例を以下に示します。
ラベル記載例:2007 年 11 月に製造された場合、下のように記載されています。
Y 07 .M 11
Set up Date
30
Summary of Contents for N8190-148
