manualshive.com logo in svg

NEC N8100-1909F, Maintenance Manual, Page: 74 / 126

Share
Download
NEC N8100-1909F Maintenance Manual Download Page 74

1. System BIOS 

 
 

Express5800/E120d-M  Maintenance Guide 

74 

Chapter 2 Convenient Features 
 

1.2.6 

 

Save & Exit 

If you move the cursor to 

Save & Exit

, the 

Save & Exit

 menu appears. 

 

 

 

The options of this menu are described below.   

 

(a) Save Changes and Exit 

The SETUP utility closes with all the changes saved in NVRAM (Non-volatile memory). After the SETUP 
utility closes, the system automatically reboots. 

(b) Discard Changes and Exit 

The SETUP utility closes without saving the changes in NVRAM. The setting at startup of SETUP utility is 
retained. 
After the SETUP utility closes, the system automatically reboots. 

(c) Save Changes 

Changes are saved in NVRAM. 

(d) Discard Changes 

The changes are discarded and the settings are reset to the one at startup of SETUP utility. 

(e) Load Setup Defaults 

This option resets all values in the SETUP utility to the default settings. 
 

Note 

The default value may differ from factory-set values. Reconfigure each item according to 

your environment by referring to the list of settings in this section. 

 

Summary of Contents for N8100-1909F































































































































Reviews:

No comments