NEC N8100-1909F Maintenance Manual Download Page 36

Page: 36 / 126

7. Resetting and Clearing the Server

Express5800/E120d-M Maintenance Guide

Chapter 1 Maintenance

Resetting and Clearing the Server

Refer to this section if the server does not work or if you want to set BIOS settings back to the factory settings.

7.1

Software Reset

If the server halts before starting the OS, press <Ctrl> + <Delete> + <Alt> keys. This clears all the data in
progress in memory, and restarts the server.

Note

To reset the server when it is not frozen, make sure that no processing is in progress

7.2

BMC Reset

Press BMC RESET Switch only if a problem occurs in EXPRESSSCOPE Engine 3 (BMC).

Do not press BMC RESET Switch in usual operation.

To reset the BMC, press BMC RESET Switch at least five seconds. Remote management feature is disabled for
about 40 seconds after BMC is reset.

Tips

BMC RESET Switch only resets BMC and that does not reboot the server.

BMC RESET switch

Summary of Contents for N8100-1909F































































































































Search results

Summary of Contents for N8100-1909F

Reviews:

NEC N8100-1909F, Maintenance Manual, Page: 36 / 126

Search results

Summary of Contents for N8100-1909F

Reviews: