NEC N8100-1909F Maintenance Manual Download Page 48

Page: 48 / 126

1. System BIOS

Express5800/E120d-M Maintenance Guide

Chapter 2 Convenient Features

System BIOS

You can check and change the parameters using the BIOS Setup utility (SETUP).

1.1

Starting SETUP

Turn on the server and proceed with POST.

After a while, the following message appears at the bottom left of the screen.

Press <F2> SETUP, ...

(* a different message may appear depending on your environment)

If you press <F2>, SETUP will start after POST, and the Main menu appears. (You can also start SETUP by
pressing <F2> key while expanding option ROM.)

1.2

Parameter Descriptions

The SETUP utility has the following six major menus.

•

Main menu

•

Advanced menu

•

Security menu

•

Server menu

•

Boot menu

•

Save & Exit menu

These menu has submenus for relevant items. Selecting submenus allows you to configure further detailed
parameters.

Summary of Contents for N8100-1909F































































































































Search results

Summary of Contents for N8100-1909F

Reviews:

NEC N8100-1909F, Maintenance Manual, Page: 48 / 126

Search results

Summary of Contents for N8100-1909F

Reviews: