NEC N8100-1909F Maintenance Manual Download Page 55

Page: 55 / 126

1. System BIOS

Express5800/E120d-M Maintenance Guide

Chapter 2 Convenient Features

(a) Memory Information submenu

For details about the options, see the table below (display only).

Option

Parameter

Descriptions

Total Memory

Information Only

The physical capacity of installed memory is displayed.

Available under 4GB

Information Only

Memory capacity available in an area under 4 GB is
displayed.

Current Memory Speed

Information Only

The current memory operating frequency is displayed.

CPU1_DIMM1-6 Status
CPU2_DIMM1-6 Status

Information Only

Capacity and status of each DIMM is displayed.

Number

: Indicates memory capacity and DIMM is

working normally.

Number (Error)

: Indicates memory capacity and failed

DIMM is enabled.

Disabled

: Indicates DIMM is degraded due to memory

error.

Not Present

: Indicates no DIMM is installed.

[ ]: Factory settings

Summary of Contents for N8100-1909F































































































































Search results

Summary of Contents for N8100-1909F

Reviews:

NEC N8100-1909F, Maintenance Manual, Page: 55 / 126

Search results

Summary of Contents for N8100-1909F

Reviews: