NEC N8100-1909F, Maintenance Manual, Page: 25 / 126

5. Troubleshooting
Express5800/E120d-M Maintenance Guide 25
Chapter 1 Maintenance
[?] When Windows Server 2008 R2 is installed while several disks are connected, the system partition
and the boot partition (100 MB) are sometimes created in another disk
→
For details, refer to the Microsoft website below:
[?]
When Starter Pack is installed on Windows Server 2008 R2, the below message is sometimes
displayed for a moment upon shutdown
→
No problems for system operation.
For details, refer to the Microsoft website below:
[?]
The system was installed as Workgroup although it is set to join the domain.

Is the LAN cable properly connected?
→
If the LAN cable is not connected, the system is installed in workgroup setting, not in domain join
setting. After the OS is started, join the domain.
[?] The following features are installed when Windows Server 2008 R2/Windows Server 2008 IIS is
installed using EXPRESSBUILDER.

Windows Process Activation Service
– Process Model
– Configuration APIs

Remote Server Administration Tool
– Role Administration Tools
– Web Server (IIS) Tools
→
The features listed above are activated because they are required for the installation of IIS basic
features.
[?] The Telnet Service is not installed
→
Change the computer name to 14 characters or less, and then install the Telnet Service
according to the following procedure:
How to install the Telnet Service
(1) Click Run on Start menu.
(2) Enter
tlntsvr/service
in the Open box, and then click [OK].
(3) Click Start menu, point to Control Panel, click Administrative Tools , and then click Services
to confirm whether the Telnet Service is registered.
* When the installation of Telnet Service is finished, there is no problem if the computer name is
set to 15 characters or more.
[?] Fails to execute "Create a parameter file for Windows OS"
→
"Create a parameter file for Windows OS" must be run using Microsoft
®
HTML Application
host. If it does not start, associate the file type with Microsoft
®
HTML Application host via the
following process.
(1) Select Run in Windows Start menu.
(2) Enter
%windir%\system32\mshta.exe/register
.
1 program still needs to close:
(Waiting for) Task Host Window