b) By default, pressing
TALK
and dialing
911
will not call emergency services.
3. Dial outside number.
a) If the number doesn't dial out within 6 seconds, your system probably has Store and Forward enabled. Just
dial
#
to have the call go through right away.
Conference
Conference is enabled by default.
To set up a Conference:
1. Establish an Intercom or outside call.
2. Press the
Conf.
soft key (soft key 2).
a) Your hear Intercom dial tone.
b) Your caller hears Music on Hold (if installed) while they wait for you to set up the Conference.
3. Do one of the following:
a) Dial extension you want to add.
b) Place or answer an outside call.
c) Retrieve a call from Park Orbit.
4. Press
Conf.
(soft key 2) to set up the Conference.
a) If you cannot add additional parties to your Conference, you have exceeded the system’s Conference limit.
5. Repeat steps 2-4 to add additional parties to your Conference.
a) To optionally place a Conference on Hold, press
Hold
(soft key 1).
b) To retrieve the Conference from Hold, press
TALK
(to show the soft keys) and then press
Hold
(soft key 1).
6. To exit the Conference, press
END
.
a) The remaining parties can continue their conversation uninterrupted.
b) If you were in Conference with two outside lines, this may set up a Tandem Call (Unsupervised Conference).
Directed Call Pickup
Directed Call Pickup is enabled by default.
To intercept a call ringing a co-worker’s extension:
1. Press
TALK
.
2. Dial
**
.
3. Dial the number of the extension whose call you want to intercept.
a) To intercept a call ringing an attendant, dial the attendant’s extension number (e.g., 301). Do not dial 0 or
01-04.
Distinctive Ringing
The capability to change ring tones and ring volume is built into the ML440 handset.
22 | DSX |
ML440 Wireless IP DECT Quick Reference Guide
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/