To Transfer your call directly to a co-worker's mailbox:
1. Do not hang up.
2. Press
Transfer
(soft key 3).
3. Press your own Message Center Feature Key.
4. Dial your co-worker's extension number.
5. Press
END
to hang up.
To Transfer your call using Hotline Automatic Transfer:
1. Do not hang up.
2. Press a Hotline Feature Key.
a) If you don't have Hotline Automatic Transfer enabled for your extension, hanging up in this step disconnects
the call.
3. Do one of the following:
a) Announce the call to make a Screened Transfer, then press
END
to hang up.
b) Press the flashing line key to return to the call if your co-worker doesn't want it.
c) Press
END
to hang up and send the call through unscreened.
d) Press your own Message Center Feature Key to Transfer the call to your co-worker's mailbox.
4. If you haven't already, press
END
to hang up.
To Transfer a call to your co-worker’s speakerphone using Handsfree Transfer:
1. While on an outside call, do one of the following:
a) Press
Transfer
(soft key 3) and dial a co-worker's extension number.
b) Press Hotline Feature Key for your co-worker
2. Listen for two beeps.
a) If you hear ringing instead of two beeps, you cannot use Handsfree Transfer.
3. Press your Flash Feature Key to send the call directly to your co-worker's speakerphone.
4. Press
END
to hang up.
Voice Mail (IntraMail)
Voice Mail is disabled by default.
The ML440 handset does not have a Message Center Feature Key assigned by default.
The Status LED on the top left of the ML440 handset flashes when you have new messages.
The ML440 handset does not have a Voice Mail Feature Key assigned by default.
To call your mailbox:
1. Do one of the following:
a) Press
TALK
and dial
*8
.
b) Press your own Message Center Feature Key.
2. If requested, enter your Security Code.
a) When you log into your mailbox, your display shows you the number of new and saved messages.
DSX |
ML440 Wireless IP DECT Quick Reference Guide
| 37
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/
