Hotline Key Busy Lamp Indications
The covered extension is:
When the key is:
Idle or not installed
Off
Busy or ringing
On
Hotline partner is in DND.
Fast Flash
To place a call to your Hotline partner:
1. Press the Hotline Feature Key.
a) You hear two beeps or Intercom ringing.
2. Talk to your Hotline partner.
a) The Hotline Feature Key lights while you are connected.
To answer a call from your Hotline partner:
1. Press
TALK
.
2. Talk to your Hotline partner.
a) The Hotline Feature Key lights while you are connected.
To Transfer a call to your Hotline partner:
1. Do not hang up.
2. Press
Transfer
(soft key 3).
3. Press your Hotline Feature Key.
4. Do one of the following.
a) Announce the call to make a Screened Transfer.
•
Hang up if your co-worker accepts the call.
b) Hang up to send the call through as an Unscreened Transfer.
c) Press the flashing line key to return to the call if your co-worker doesn’t want it.
5. When you Transfer a call, it will recall to you if it is unanswered at the destination. If you don’t answer the recall,
it diverts to Key Ring.
Intercom
Intercom is enabled by default.
An Intercom Feature Key is not assigned by default.
To place an Intercom call:
1. Press
TALK
.
a) If you have a specially-programmed Intercom Feature Key, you can press it instead of
TALK
.
2. Dial your co-worker’s extension number (normally
301
-
428
).
a) To call the operator, dial the operator’s extension number or dial
0
or
01
-
04
(depending on your system setup).
b) If your call voice-announces the destination, you can dial
1
to force the call to ring.
DSX |
ML440 Wireless IP DECT Quick Reference Guide
| 27
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/
