Message Waiting
Message Waiting is available by default, but only in systems without voice mail installed.
To leave a Message Waiting:
1. Place Intercom call to co-worker.
2. Dial
8
, then press
END
to hang up.
a) The extension you call can be unanswered or busy.
To answer a Message Waiting:
1. Your ML440 Status LED flashes slowly when you have a Message Waiting.
a) You should also see the Missed Call icon at the top of the telephone display.
2. Press
TALK
and dial
*8
.
a) The system cancels the Message Waiting if the extension you call is busy, doesn’t answer, or is Do Not
Disturb.
b) If the extension you call doesn’t answer, dial
*8
to automatically leave them a Message Waiting.
c) If your Status LED continues to flash, you have additional messages waiting.
Microphone Mute
Microphone Mute is available in the ML440 handset by default.
To mute your handset’s microphone:
1. While on a handset or speakerphone call, press
MUTE
on the side of your handset.
2. The Mute icon at the top of the handset display indicates that the microphone is muted.
a) To cancel Microphone Mute, press MUTE again.
b) Microphone Mute also cancels when you press
END
to hang up.
Monitor / Silent Monitor
Monitor / Silent Monitor is disabled by default.
To Monitor a call:
1. Place an Intercom call to the busy extension.
a) Listen for busy or busy/ring tone.
b) With IntraMail installed, you will hear a voice prompt first.
2. Dial
6
.
3. Listen to the conversation in progress.
a) Caution: Monitor provides no warning tones prior to intrusion. Monitor may be interpreted as an invasion
of privacy.
30 | DSX |
ML440 Wireless IP DECT Quick Reference Guide
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/
