To Barge In on a Tandem Call:
1. Do one of the following:
a) Press the line key for one of the busy lines.
b) Press
TALK
and dial the line’s Direct Line Access code (e.g., 101 for line 1).
2. Dial
4
.
3. Talk to the callers in Conference.
To place a Tandem Call on Hold (after Barging In):
1. Press
Hold
(soft key 1).
a) While on Hold, the tandem callers can continue talking with each other.
2. To rejoin the Tandem Call you have placed on Hold, press one of the line keys involved in the Tandem Call.
To set up a Line-to-Line Transfer:
1. Place or answer an outside call.
a) This is a type of Tandem Call in which you never have to join in with your outside callers.
2. Press
Transfer
(soft key 3).
3. Place or answer another outside call.
4. Press
END
to hang up.
a) The two outside callers join together, just line a normal Tandem Call.
b) The line/loop keys for the outside lines stay on.
c) If the outside parties immediately disconnect, the lines you selected or your extension does not have Tandem
Call capability.
Transfer
Transfer is enabled by default.
To Transfer your call:
1. Do not hang up.
2. Press
Transfer
(soft key 3).
3. Do one of the following
a) Dial your co-worker's extension.
b) Press a Call Coverage or Hotline Feature Key. (Also see Hotline Automatic Transfer below.)
c) Dial a Ring Group or UCD Group master number.
4. Do one of the following:
a) Announce the call to make a Screened Transfer, then press
END
to hang up.
b) Press the flashing line key to return to the call if your co-worker doesn't want it.
c) Press
END
to hang up and send the call through unscreened.
d) Dial
8
to Transfer the call to your co-worker's mailbox.
5. If unanswered, your call will recall to you. If you don't answer the recall, the call normally diverts to Key Ring.
36 | DSX |
ML440 Wireless IP DECT Quick Reference Guide
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at
http://www.renderx.com/
