1. Installing Internal Optional Devices
Express5800/R110h-1 User’s Guide
73
Chapter 2 Preparations
Using the optional RAID controller
For details, refer to the manual that comes with optional RAID controller.
Important
•
Avoid static electricity to work with the procedure below. For details, see
Chapter 2
(
1.2 Overview of Installation and Removal
).
•
Do not change the mode to hibernate when building a RAID system.
Note
•
When installing an optional RAID controller, run the BIOS Setup Utility, select
PCI Configuration
from the
Advanced
menu, and then make sure that the
parameter of
PCI Slot
xx
ROM
(
xx
is PCI slot number) is set to
Enabled
.
•
When connecting a RAID controller, set the boot priority to 8th or higher in the
Boot menu of the BIOS Setup Utility. If the setting is 9th or lower, the
configuration menu for RAID controllers cannot be launched.
Removal
1.10.4
To remove a riser card, reverse the installation procedure. Hold the riser card to which the PCI card is
attached firmly and remove it. Additionally, another worker must hold this server to prevent it from moving
when removing the riser card.
If using the server while the PCI card is removed, attach the blank cover that comes with the riser card.
