1. Installing Internal Optional Devices
Express5800/R110h-1 User’s Guide
46
Chapter 2 Preparations
Installation
1.7.3
Install a DIMM by using the following procedure.
See steps 1 to 4 in
Chapter 2 (1.2 Overview of Installation and Removal)
for preparations.
1.
2.
Lift the duct off the server.
3.
Open both levers of the target DIMM slot
outward and push the DIMM straight into
the socket.
When the DIMM is inserted correctly, the
lever automatically closes.
Important
•
Align the notch on the DIMM with the key on the slot.
•
Do not apply too much pressure when you push a DIMM into the socket.
4.
Attach the duct.
5.
Assemble the server.
6.
Turn on the server and confirm that no error messages are displayed in POST screen.
If any error messages are displayed, see
Chapter 3 (1. POST Error Message)
in "
Maintenance Guide
".
7.
Run the BIOS Setup Utility. On the
Advanced
menu, choose
Memory Configuration
,
Memory
Information
. Make sure the capacity of added DIMM is displayed properly.
See
Chapter 2 (1. System BIOS)
in "
Maintenance Guide
".
8. On
the
Advanced
menu, choose
Memory Configuration,
Memory Retest
and then specify
Yes
.
Choose
Save Changes and Exit
to restart.
9.
Set the paging file size to the recommended value (Total memory size x 1.5) or more.
When using a Windows OS, see
Chapter 1 (6.1 Specifying Memory Dump Settings (Debug
Information))
in "
Installation Guide (Windows)
".
For other OS, see the manual provided with the operating system or contact your sales representative.
Notch
Key
